Installing your Faucet Filter is a breeze, but there are a few key steps to ensure everything fits just right. Here’s how to get set up:
-
Remove your existing aerator (the small screen where water comes out).
-
Use the included ring sizer to figure out if your faucet needs one of the included adapters.
-
Install the correct adapter if needed, then attach your Faucet Filter.
-
Twist the attachment nut until the filter is snug and secure. No need to overtighten!
Or follow the instructions in our video guide.
If you see leaking, try wrapping plumber’s tape (included!) around the threads to help seal it.
Seeing dripping? Double-check that you’re using the correct adapter and gasket combo. Some adaptors may screw in but don’t form a perfect seal, which can lead to leaks—your ring sizer will help you find the right fit.
We know this may be a confusing or even intimidating process so we've developed a helpful video guide to walk you through the process, based on your own setup! Just follow the QR code on your instructions manual to get started.
If anything feels off, or if you’re missing a part, can’t find an adapter that works, or notice damage, don’t worry! You can get in touch with our Customer Experience team directly, just submit your request through our contact form here and we’ll help make it right.
Just a reminder, aerators follow the usual ‘righty-tighty, lefty-loosey’ rule, but since you're looking down at your faucet from above, the perspective flips. That means turning to the right (clockwise from above) will actually loosen the aerator, and turning to the left (counterclockwise) will tighten it, the opposite of what you'd expect!
You can learn more about the Canopy Faucet Filter in our User Manual here.